SF-360E(320E) Nau'in Drawer Wanda Aka Fitar da Fuska Guda Daya

SF-360E(320E) Nau'in Drawer Fuska Guda

Takaitaccen Bayani:

Gudun ƙira: 150m/min-200m/min.
Nisa mai inganci: 1400-2200 mm.
Ƙirar matsi mara kyau, ƙarancin zafi mai zafi, ta yadda matsa lamba zai iya haɗawa daidai da ainihin takarda da kuma saman abin nadi, don haka siffar corrugated ya fi kyau, saboda matsa lamba yana da kyau, saman katako ya fi kyau, kuma manne yana da kyau. a yi amfani da su iri ɗaya, wanda ke sa haɗin kai mai gefe guda na ƙugiya ya fi kyau.
Canjin jujjuyawa cikin sauri, mintuna 15, don maye gurbin tirelar cart ɗin da ke ɗauke da cikakken saiti na corrugation, ana motsa shi da injin, an ɗora shi cikin injin, an gyara shi akan gindin injin, kuma ana iya maye gurbin corrugation cikin sauri da sauƙi.
An yi corrugation daga 48CRMO high quality-alloy karfe, zafi-bi da, da kuma saman da aka nika da plated da wuya chromium ko tungsten carbide.

Aika mana imel

Cikakken Bayani

Tags samfurin

Siffofin tsari

Gudun ƙira: 150m / min

Nisa mai inganci: 1800-2500mm

Babban corrugating nadi: ￠ 320mm (daban-daban bisa ga daban-daban iri), matsa lamba nadi ￠ 370mm, preheating yi ￠ 400mm

Ƙirar matsi mara kyau tare da ƙarancin zafi mai zafi yana sa ainihin takarda ta danna daidai kuma a haɗe zuwa saman abin nadi na corrugating, ta yadda za a iya samar da corrugated mafi kyau. Saboda matsa lamba yana da daidaituwa, saman katako zai iya zama mafi kyau a rufe shi da manne, don haka takarda mai gefe guda ɗaya zai iya dacewa da kyau.

Ana aika da dukkan nau'ikan rollers ɗin a cikin injin kuma an gyara su a gindin injin. Maɓallin maɓalli ɗaya kawai ake buƙatar don maye gurbin corrugating nadi.

An yi abin nadi na corrugated da 48crmo high quality-alloy karfe. Bayan maganin zafi, ana bi da saman tare da tungsten carbide bayan niƙa, kuma taurin saman yana sama da digiri hv1200.

Ana ɗaukar tsarin kula da jakar iska tare da babban kwanciyar hankali don abin nadi mai ruɗi da abin nadi mai matsa lamba, kuma ana samun tasirin sarrafa magudanar iska.

Adadin ciyarwar manne ana sarrafa shi ta hanyar daidaitawar lantarki, kuma na'urar raba manne lantarki ce. Tsarin yada manne zai iya aiki da kansa lokacin da babban injin ya tsaya, don hana manne daga bushewa.

Tsarin gluing na wayar hannu yana dacewa don tsaftacewa da kiyayewa.

Tsarin sarrafawa mai sauƙi, aikin allon taɓawa a cikin fuska, da nunin hoto mai launi na matsayi na aiki, zaɓin aiki, alamar kuskure, matsala da saitin saiti duk suna nuna cewa injin yana da cikakkun ayyuka, aiki mai sauƙi da ɗan adam.

Madaidaicin saiti da aka gina a ciki yana da tsarin feshi don daidaita yanayin zafi da abun ciki na ainihin takarda.

Ana amfani da man shafawa mai zafin jiki don babba da ƙarin abin nadi da abin nadi na matsa lamba don tabbatar da ɗaukar rayuwa da aiki mai santsi.

Siffofin fasaha

Faɗin aiki	1800-2500 mm
Hanyar aiki	hagu ko dama (akayyade bisa ga bitar abokin ciniki)
Tsara gudun	150m/min
Yanayin zafin jiki	160-200 ℃
Tushen gas	0.4-0.9 mpa
Turi matsa lamba	0.8-1.3 mpa
Nau'in lalata	(nau'in UV ko nau'in uvv)
Diamita na babba corrugating abin nadi	320mm
A diamita na matsa lamba nadi	￠370mm
Diamita na dabaran	￠269mm
Diamita na ƙayyadadden abin nadi	￠ 153mm
Diamita na preheater	￠ 400mm
Babban injin tuƙi mai canzawa	22 kw
Motar tsotsa	11 kw
hadawa ragewa	100W
Motar daidaitawa	200W* 2
Motar famfo na roba	2.2kw
Motor na manne shafi sashi	3.7KW